PRESSLINE Heat Seal Tape is developed by combining Nylon Jersey, Polyurethane Film and
Stretchy Hot Melt Glue film, and can be used to cover the seam line of Wet/Dry suits as well
as for the reinforcement.

■Characteristics

・Both PU Film and Hot Melt Glue Film are stretchy, you can get an excellent elasticity.

・Has the soft feel after the welding because of soft urethane resin.

・As no solvent is used, it's safe and sanitary for body.

・It excels environmentally as it can be dissolved and welded by heat.

■Descriptions

Substrate	Nylon Jersey
Hot Melt Glue Film	Polyuretｈane
Type of Material	3 layer waterproof material
Welding temperature	120℃〜130℃

■Size[PL-1201]

10mm×35m approx.

12mm×35m approx.

15mm×35m approx.

20mm×35m approx.

■Size[PL-1201WP2]

300mm×20m approx.

■Welding method

Hot air	○
Heat roll	○
Ultrasonic	○
Heat press	○

※Length per roll may change depending on the lot.
※We have stock of 15mm, 20mm width tape as a standard goods and keep them in stock,
But please ask us about the production lot and delivery time for other width (10, 12mm etc).
※Standard color is Black only, but other color than black could be custom-made, and
please ask us about the production lot and delivery time.

■Directions for use

• As was mentioned above, our simple waterproof filler tape can be easily welded onto a variety
  of waterproof materials. However, please note the followings to ensure the better result.
• Welding temperature indicates the one needed to dissolve the welding adhesive on the tape.
  It is important to implement the advanced tests as welding pressure and time may vary depending
  on the structure of a welded materials (i.e. whether it is nonporous like membrane or porous like cloth surface).
• Materials coated by silicone or acrylic resin, or hairy pile may not be properly welded.