H.S.T. is the newly developed heat seal tape by combining the Hyper-Stretch PU Film on which the slippery treatment is done, with the Stretchy Hot Melt Glue film, and H.S.T. can be used to cover the seam line of Wet/Dry suits as well as for the reinforcement.

■Characteristics

・Both PU Film and Hot Melt Glue Film are stretchy, you can get an excellent elasticity.

・Has the slippery feel after the welding because of soft urethane resin.

・It excels environmentally as it can be dissolved and welded by heat.

■Descriptions

Substrate	H.P. PU Film
Hot Melt Glue Film	Polyuretｈane
Type of Material	2 layer waterproof material
Welding temperature	120℃〜130℃
color	BK ※

■Size ※

10mm×40m approx.

12mm×40m approx.

15mm×40m approx.

20mm×40m approx.

■Welding method

Hot air	○
Heat roll	○
Ultrasonic	○
Heat press	○

※Length per roll can be changed depending on the lot.
※We have stock of 10mm, 15mm. width tape as a standard and keep them in stock, but please ask us about the production lot and delivery time for other width (12, 20mm etc).
※Standard color is Black only, but other color than black could be custom made, and ask us about the production lot and delivery time.

■Directions for use

• As was mentioned above, our simple waterproof filler tape may be easily welded onto a variety of waterproof materials. However, note the following to ensure the better results.
• Welding temperature indicates the one needed to dissolve the welding adhesive on the tape.
  It is important to implement a test in advance as welding pressure and time may vary depending upon structure of a welded material(i.e. whether it is nonporous like membrane or porous like cloth surface).
• Materials coated by silicon or acrylic resin, or hairy pile may not be strongly welded.